SmartSDR for MacOS version 1.4.32 has been released
SmartSDR is a full featured FlexRadio client that enables your Mac to operate your FlexRadio device.
It is fully compatible to SmartSDR v1, v2 (including SmartLink) and v3 (including MultiFlex and SmartControl).
Important: This App requires a FlexRadio Systems® Series-6000 Software Defined Radio (SDR).FACTS AND FEATURES:
SmartSDR offers all features of SmartSDR for Windows such as:
■ Unlimited number of Slices, Panadapters (limited only by Radio model)
■ Maintain all Radio, Slice and Panadapter settings
■ SmartLink™ remote access support
■ MultiFlex™ support
■ And all the other featurs of the Windows Version (only exception: Diversity)There is no longer need for running SmartSDR for Windows on Bootcamp, Parallels or a separate PC because these features are also included:
■ Radio Firmware Updates
■ Setting up and registering SmartLink – you can even maintain multiple SmartLink accounts
■ Installation of Region (Turf) Files
■ Backup / Restore Radio Configuration and MemoriesIn addition, the following extra features are included:
■ Full featured FT8 / FT4 Tool
■ Logbook with auto logging and ADIF Im- and UDP Export (Synchronizes with Smartsdr for iOS over iCloud)
■ DX-Cluster Tool
■ Band Plan
■ And several additional Tools and featuresEXTERNAL SOFTWARE SUPPORT
Even though FT8 is included, you can run this App along with your favorite external Software like WSJT-X, fldigi or others because:
■ CAT Support for FlexRadio CAT, Kenwood TS-2000 emulation and RigCtrl / Hamlib
■ DAX TX and RX audio streaming to any deviceEXTERNAL PERIPHERALS SUPPORT
■ You can use a Midi Controller (like the CMD-Micro and others) to fully control your Radio
■ CW Straight Key / Paddle via Midi Controller or assigned keyboard keys
■ External Mike support (e.g. for USB Mikes)
Please note: This is no Catalyst Version of SmartSDR for iOS. This is a completely new written native macOS App.
WHAT YOU NEED:
- A FlexRadio Systems® FLEX-6000 series radio
- A Mac which runs at least Mac OS 10.15
SUPPORTED SDR HARDWARE:
FLEX-6300, FLEX-6400, FLEX-6400M, FLEX-6500, FLEX-6600, FLEX-6600M, FLEX-6700
Find out more here: http://go-to.me/smartsdr
Read the Manual: http://go-to.me/smartsdrmac-manual
What’s new in version 1.4.32
This update includes the following changes and fixes:
- An issue with opening the CW Macros screen was fixed
- Wrong FT8 CQ behavior has been fixed
- FT8 auto logging feature added which allows logging without user intervention
- Improved performance for the Logbook with large amount of entries
- Improved performance of the DX-Cluster tool
- Keyboard shortcuts can now be used for almost any function. They can now be assigned in the same way like MIDI / FlexControl functions
- The following new MIDI Commands have been added:
- APF, VOX, Direct Slice and Band selection, Frequency Up/Down, Cancel CWX
- Open Logbook, DX-Cluster, FT8
- Log QSO Window
- TX Antenna LEDs
- Compatibility issue with older Firmware fixed
- Wrong Spot colors for N1MM spots fixed
- Added the possibility to stop CWX by CAT command
- Several additional minor and cosmetic changes
What’s new in version 1.4.31
This update includes the following changes and fixes:
- Wrong FT8 CQ behaviour has been fixed
- FT8 auto logging feature added which allows logging without user intervention
- Improved performance for the Logbook with large amount of entries
- Improved performance of the DX-Cluster tool
- Keyboard shortcuts can now be used for almost any function. They can now be assigned in the same way like MIDI / FlexControl functions
- The following new MIDI Commands have been added:
- APF, VOX, Direct Slice and Band selection, Frequency Up/Down, Cancel CWX
- Open Logbook, DX-Cluster, FT8
- Log QSO Window
- TX Antenna LEDs
- Compatibility issue with older Firmware fixed
- Wrong Spot colors for N1MM spots fixed
- Added the possibility to stop CWX by CAT command
- Several additional minor and cosmetic changes
What’s new in version 1.4.23
- This update fixes a few minor issues.
